According to the data of some developed countries, China’s transmission line loss rate is much higher than that of the United States. 

Medium frequency furnace is a heating equipment that converts electric energy into heat energy. All the time, the energy saving and consumption reduction of medium frequency furnace and the reduction of production cost are the focus of enterprises. As we all know, the calculation formula of electric power of medium frequency furnace is p (consumed power) = LXL (square of current) XR (equivalent resistance of medium frequency furnace). Therefore, it can be seen that as long as the current is small, the power of medium frequency furnace will become small.

In recent years, with the development of science and technology and the improvement of product quality requirements, many jewelry manufacturers and handicraft manufacturers have chosen to use medium frequency furnace for smelting non-ferrous metals and achieved remarkable results. So what are the advantages of medium frequency furnace in metal smelting?

In the forging workshop, industrial furnace smelting metals include cupola, induction furnace, electric resistance furnace, electric arc furnace, vacuum furnace, open hearth furnace, kiln furnace, etc.; sand-type drying furnace with bake sand type, iron alloy oven and casting annealing furnace; In the workshop, there are various heating furnaces for pre-forging heating of steel ingots or billets, and heat treatment furnaces for stress relief after forging; in the metal heat treatment workshop, various annealing, normalizing, quenching and tempering heat treatments for improving the mechanical function of the workpiece Furnace; in the welding workshop, pre-weld preheating furnace and post-weld tempering furnace with weldments;

The most effective method for the failure of the intermediate frequency furnace is to use a small current experiment to judge whether the rectifier circuit is faulty or part of the inverter fault. When the DC current is less than 513 volts

The most effective way for the failure of the medium frequency furnace is to use the low current experiment to judge whether it is the fault of the rectifier circuit or the fault of the inverter part. In the low current experiment, when the DC voltage is less than 513v, it indicates that there is a phase loss fault in the DC rectifier part. Check the specific thyristor fault, and the pulse breaking method should be used to judge whether it is the thyristor fault or there is no trigger pulse.