In general, the faults of intermediate frequency power supply can be divided into two categories

The circulating water system is the core concern in the normal operation of the complete set of equipment of the medium frequency boiler, which can be focused on from the following two points.

The traditional heat treatment method is to control a reasonable heating temperature, keep it for a certain time (also known as holding time or heating time) at this temperature

During the operation of intermediate frequency furnace, the reactor fault is difficult to judge and handle. Generally speaking, the faults prone to occur in the reactor mainly include the following

Many friends about the gold melting furnace don’t know what it is used for

It is often found that a lot of energy and time are spent in the maintenance of if equipment

Induction heating technology is the most effective heat treatment process commonly used at present.

The surface quality of continuous casting slab in medium frequency electric furnace is an important factor affecting the product qualification rate and production cost. Ensuring good surface quality of continuous casting slab is the prerequisite for slab hot delivery and direct rolling. 

How to check the equipment of medium frequency smelting furnace? Luoyang Wanle electric power equipment factory, as a professional R & D base of heating and smelting furnace, is very clear about this.

Fault phenomenon: frequently burn out the thyristor components, and burn out immediately after replacing the new thyristor.

What should be paid attention to in order to ensure safety in the smelting process of medium frequency furnace

In order to maximize the productivity of the induction heating device, the heating time should be as short as possible.