When users choose and use induction furnaces, they need to know some knowledge about the configuration of power cabinets and furnace bodies. Today we will give you a brief introduction.

At present, the common configurations of power cabinet and furnace body are as follows:

1. One set of power cabinet is equipped with one furnace body. This method has the advantages of low investment, small floor area and high use efficiency of a single furnace body. But the disadvantage is that there is only one furnace body, which is heated or melted in the furnace body

After the metal is processed, the furnace body needs to be emptied before the next process can be carried out, which makes continuous production impossible.

2. One set of power cabinet is equipped with two furnace bodies, one of which is connected to the power supply, and the other is not used temporarily. This method is used to prepare a standby furnace for the production line. If

One furnace body has a fault and cannot be repaired in a short time. We have at least one backup plan B available to maintain production capacity as far as possible.

3. A set of power cabinet is equipped with two furnace bodies, both of which shall be connected with power supply, one of which shall be fixed for smelting and the other for thermal insulation. This method is applicable to the comparison of pouring time

Long case. The molten steel after smelting needs to keep the temperature in the furnace for a period of time, so the method of "one melting and one insulation" is adopted, so that both furnaces can be fully utilized.

4. A set of power cabinet is equipped with two furnace bodies, and both furnace bodies need to be connected with power. At the same time, we can select high-performance furnace change switches between the two furnace bodies to make furnace change more convenient.

Using this method, the two furnaces can work in rotation, and the smelting and insulation functions can be switched at any time, which is standby for each other. Even if the furnace lining is changed, the production will not be affected. This is the most efficient way

Yes, but the cost will also increase.

Of course, the power supply and furnace should be configured according to the actual production situation of the user.

The above is the introduction about induction furnaces shared by shennai power. Welcome to follow us and let us solve more questions about induction furnaces for you.